CNC Machine Milling Machine

 

 

 

 

Machine features 

 

*cnc machine milling machine X, Y, Z three -axis itinerary: 1500x800x700mm

*The main axis rotation method is the belt connection, the speed: 8000 rpm.

*The standard configuration of the knife library is a disc, 24 knife libraries

*The header is a heavy -duty box structure with internal rib reinforcement and high rigidity.

*The main axis knife uses the pneumatic mechanism. When the knife is hit, the spindle is uniformly stressed to extend the life of the bearings.

*The electrical box uses an internal segregate design to separate the heating source of the controller. Use the heat exchange device to heat the heat in front to avoid external dust from entering the electric box; the rear side uses the fan to heat the heat plate.

*The three -axis uses the GAO precision roller screw, combined with precision nut pre -pressure and tail pre -tensile devices to ensure that the back space and thermal deformation of the machine are kept at a low value for a long time.

*X and Y axis (X axis is 6 slides, Y axis is four guide rails) uses a P -class roller linear guide rail. Cycle accuracy.

*All finished products have been checked and tested by laser positioning to ensure the best positioning accuracy and servo characteristics, and strict inspection measures before shipping before shipping to ensure that the accuracy of the machine is stable for a long time.

 

Machine parameter 

 

	Parameter	Unit	V-1580
●	TRAVEL
	X-axis travel	mm	1500
	Y axis travel	mm	800
	Z-axis travel	mm	700
	Spindle nose to work surface	mm	160-860
	Spindle center to column guide	mm	855
●	work table
	Table Dimensions (L x W)	mm	1600*800
	T-slot (number-size*spacing)	mm	7*22X110
	maximum load	Kg	2000
L	Spindle
	Spindle speed	rpm	8000
	Spindle motor power	kw	15
	Spindle taper hole (model/installation size)		BT50（155）
	XYZ motor	kw	4.5kw/4.5kw/4.5kw

 

cnc machine milling machine specifications

 

1>. FANUC 0IMF control system

2>. Belt spindle BT50 8000 rpm

3>. Spindle oil cooler device

4>. Chip removal after flushing

5>. Automatic lubrication system

6>. Foundation screws and spacers

7>. Toolbox

8>. Working light (explosion proof light)

9>. Warning light

10>. Spindle blowing device

11>. Fully enclosed cover

12>. Automatic power off system

13>. Cooling water system

14>. Air Gun

15>. Rigid tapping function

16>. Electric box heat exchanger

 

Installation Process Inspection for CNC Machine Tools

 

cnc machine milling machine  are widely used in modern industrial production due to their high precision, high efficiency, and high automation. The installation of CNC machine tools is a complex task that requires a systematic approach to ensure that the machine works reliably and efficiently. Installation process inspection is an essential step in the installation of CNC machine tools, which can effectively ensure the accuracy and quality of the machine tool's installation and commissioning. This article will discuss the installation process inspection for CNC machine tools.

Firstly, the inspection should be carried out in accordance with the installation process requirements. Before installation, the installation process should be determined based on the technical requirements of the machine tool and specified in the installation plan. The installation plan should include critical control points, inspection items, and inspection methods. The inspection should be carried out by professionals or technicians who have received training and have the necessary qualification or certification to perform the inspection.

Secondly, the inspection should be conducted in a step-by-step manner. Each step of the installation process should be inspected before proceeding to the next step. The inspection should include visual inspection, measurement inspection, and functional inspection. Visual inspection is to check the appearance of the machine tool, such as whether there is any damage or deformation in the frame, whether the wiring is neat and tidy, whether the lubrication system is installed correctly, etc. Measurement inspection is to check the machine tool's accuracy and alignment, such as checking whether the spindle is perpendicular to the worktable, whether the machine tool's horizontal and vertical axis is parallel, etc. Functional inspection is to verify that the machine tool can perform its intended operation correctly, such as checking whether the hydraulic system can smoothly start up, whether the temperature control system can maintain the required temperature, etc.

Thirdly, the inspection results should be recorded systematically. The inspection results should be recorded in a clear and concise manner, including the inspection items, inspection results, and notes. The inspection records should be signed or stamped by the inspector, and the records should be filed and managed in a systematic way. If any non-conformance is detected during the inspection, the inspection team should provide feedback to the relevant department or personnel to take corrective action promptly.

In conclusion, installation process inspection is an essential step in the installation and commissioning of CNC machine tools. The inspection should be carried out according to the installation process requirements, in a step-by-step manner, and the results should be recorded systematically. The purpose of inspection is to ensure that the machine tool can work reliably and efficiently, and to provide customers with high-quality products and services.

 

 

 

 

 

 

Populære tags: cnc machine milling machine, China, suppliers, manufacturers, factory, price, for sale, made in China